Red T18 trapezoidal steel sheet – polyester coating, second grade

Red T18 trapezoidal steel sheet – polyester coating, second grade

5,46 € excl. VAT | 6,71 € incl. 23% VAT

1 in stock

Red T18 trapezoidal steel sheet – polyester coating, second grade

Red T18 trapezoidal steel sheets with a polyester coating are offered as second-grade material for roofing and wall cladding. Available colours include brick red, red, cherry red and burgundy, depending on the current lot. The Polish listing specifies RAL 8004, 3011, 3009 and 3016, steel thicknesses of 0.40–0.50 mm and sheet lengths from 2 to 4 metres. The sales unit is one square metre of actual sheet area. To arrange a free quote, provide the required area, preferred colour and sheet lengths, together with the delivery address.

Profile T18

Colour options RAL 8004 / 3011 / 3009 / 3016, subject to availability

Coating Polyester

Steel thickness 0,40–0,50 mm

Sheet lengths 2,0 / 2,5 / 3,0 / 3,5 / 4,0 m

Grade Second grade

Sales unit m² of actual sheet area

Free quote



+48


Our branches

Serock – Dzierżenin 34 E · Directions
Błonie – ul. Sochaczewska 138 A · Directions
Radom – ul. Grobickiego 8 · Directions
Łódź – Natolin 8 · Directions
Olsztyn – Barczewo, ul. Prosta 9 · Directions
Wrocław – ul. Jerzmanowska 10 C · Directions
Gorzów Wielkopolski – ul. Zielona 33/34 · Directions

SteelProfil branches in PolandOpen branch mapCollapse branch map

Map of SteelProfil branches in Poland and the head office in Serock
Masovian Voivodeship Lesser Poland Voivodeship Warmian-Masurian Voivodeship Łódź Voivodeship Opole Voivodeship Lower Silesian Voivodeship Silesian Voivodeship Subcarpathian Voivodeship Świętokrzyskie Voivodeship Lublin Voivodeship Podlaskie Voivodeship Pomeranian Voivodeship West Pomeranian Voivodeship Kuyavian-Pomeranian Voivodeship Greater Poland Voivodeship Lubusz Voivodeship

Lower Silesian Voivodeship

SteelProfil – Wrocław branch
ul. Jerzmanowska 10 C, 54-519
Email: [email protected]
View on map
Tel. +48 500 409 109
Wrocław, Legnica, Wałbrzych, Jelenia Góra, Kłodzko, Lubin, Bolesławiec, Zgorzelec, Głogów

Branch addresses and contact details

Choosing sheets for your project

Confirm the colour, length, thickness and condition of the available lot before ordering. The suitability of a sheet for a particular roof or wall depends on its profile geometry, supports and installation requirements.

Example trapezoidal steel sheet profile with dimensions, an additional stiffening rib and a capillary groove

This example profile drawing shows an overall width of 1170 mm, a cover width of 1128 mm and a profile height of 17 mm. Further marked dimensions are 118 and 70 mm. The left detail shows an additional stiffening rib and the right detail a capillary groove. Confirm the dimensions of the available lot with the branch.

Diagram of a coated steel sheet showing the steel core and protective layers on both sides

The diagram shows a steel core with zinc coating, a conversion layer, primer and a decorative finish on both sides. This offer specifies a polyester finish.

Select the colour and sheet lengths from the stock available at the branch. For a delivery quote, provide the quantity and destination.

Product photographs

The gallery shows red sheets alongside grey and brown examples from the wider range.

What our customers say:

Leave your phone number