NEXLER BITFLEX 1KP bituminous waterproofing with polystyrene filler, 30 L
NEXLER BITFLEX 1KP is a ready-to-use, single-component, solvent-free bituminous thick coating with a polystyrene filler. Use it for vertical waterproofing of foundations and basement walls, or horizontally beneath a foundation slab. The material also bonds EPS and XPS insulation boards. This pack contains 30 litres.
| Material per mm of dry film | ≈ 1.2 L/m² |
|---|---|
| Interval between coats | 6–7 h |
| Application temperature | +5 … +30 °C |
| Pack volume | 30 L |
| Rain resistance | 6–7 h |
| Reaction to fire | E |
Free quote
Choosing the coating thickness
The required dry film is 2 mm for ground moisture, 3 mm for standing or accumulated rainwater, and 4 mm for water under pressure. Approximate consumption is 2.4, 3.6 and 4.8 L/m² respectively. For bonding EPS or XPS boards, allow 1–1.5 L/m².
Mix before use. Apply with a trowel or suitable spray equipment to the primed substrate in at least two passes, allowing each layer to dry. When spraying, limit each pass to 3 mm. The manufacturer specifies backfilling after three days and no later than three months after application.
SteelProfil – Wrocław branch
Lower Silesian Voivodeship
ul. Jerzmanowska 10 C, 54-519
Email: [email protected]
View on map
Tel. +48 500 409 109
Wrocław, Legnica, Wałbrzych, Jelenia Góra, Kłodzko, Lubin, Bolesławiec, Zgorzelec, Głogów
SteelProfil branches in Poland
Serock – Dzierżenin 34 E, 06-114 Dzierżenin
Błonie – ul. Sochaczewska 138 A, 05-870 Błonie
Radom – ul. Grobickiego 8, 26-617 Radom
Łódź – Natolin 8, 92-701 Łódź Nowosolna
Olsztyn – ul. Prosta 9, 11-010 Barczewo
Wrocław – ul. Jerzmanowska 10 C, 54-519 Wrocław
Gorzów Wielkopolski – ul. Zielona 33/34, 66-400 Gorzów Wielkopolski
Check availability · +48 500 409 109
What our customers say:
