How organically coated steel sheet is made
In coil coating, a continuous strip of metal-coated steel is cleaned, pretreated, painted and cured before it is formed into the finished product. A roofing or cladding sheet may start as galvanised or aluminium-zinc-coated strip. The paint system can differ between the exposed face and the reverse side to suit their different functions. Each application and curing stage contributes to adhesion and the properties of the finished surface. The sequence below describes a typical two-coat process. The particular substrate, primer and topcoat are specified for the product.
Preparing the strip
The line first removes oil and other residues from the metal coating. A pretreatment prepares the surface for painting and helps the primer adhere evenly.
Applying and curing the primer
Roll coaters apply the specified liquid coating to the strip. The exposed face generally receives a primer, with a suitable primer or backing coat on the reverse. In the oven, volatile components evaporate and the coating cures.
Applying the topcoat
After cooling, the strip passes to the next coating head, which applies the finish to the exposed face. A further curing and cooling cycle follows. The curing conditions influence hardness, adhesion and resistance to mechanical and chemical exposure. The finished strip can then be recoiled for subsequent forming.
