Metallic coatings on steel sheet
A metallic coating protects the steel beneath it. Two common choices for construction sheet are hot-dip zinc and an aluminium-zinc alloy. Both can be applied continuously to the two faces of a steel strip before it is formed into roofing or cladding. When comparing sheets, check the alloy and the specified coating mass. A figure in grams per square metre describes a mass per area, while a figure in micrometres describes thickness. Also check the exposure conditions and any additional surface treatment specified for the particular product.
Hot-dip galvanised steel
A continuous galvanising line coats both sides of the strip with zinc. The amount of zinc can vary with the specification. Some finishes show the zinc crystal pattern known as spangle. A minimised-spangle finish gives a more uniform appearance.
Aluminium-zinc alloy coating (AZ)
The alloy described here contains approximately 55% aluminium, 43.4% zinc and 1.6% silicon by mass. The 150 and 180 g/m² figures in the original guide are examples of coating masses for both faces combined. They do not specify the thickness of the steel core.
Surface treatment and intended exposure
Some products have an additional surface treatment to reduce fingerprints and handling marks. For a farm building or livestock housing, check the manufacturer’s permitted exposure on each face. The atmosphere inside the building, especially where there is moisture or ammonia, can differ considerably from the outdoor environment.
